Our range of products for high, Medium and low voltage is applied to the transmission and distribution systems.
In addition to standard products, Electromechanical Lake S. A. It offers tailor-made products for special applications under the client's requirements.
Disconnectors of line type SGU-ER are equipment of maneuver for aerial networks of direct current applications. They are used to feed, disconnect or connect sections of traction lines or parallel lines. These disconnectors are composed of a cutting blade, complemented by an arc restrictor device, that you enable interrupt current inductive and capacitive. The innovation lies in the possibility of quick-opening, It allows to increase the shelf life of power contacts and therefore of the disconnector. The disconnector is motorized to operate it in form local remote and with a drive manual of emergency.
Single-pole type equipment suitable for horizontal mounting / vertical outdoor mounting. Suitable for mounting on concrete or steel and its command post at the base of the same post.
• The motorized command binds to the switch through a tree built in galvanized steel tube, and may have an insulating intermediate to protect to the operator.
• Electrical command consists of engine, reducer, contactors, relays, push-in terminals, auxiliary contacts, heater, and other accessories, inside a box of steel protected according to IP 54.
• Allows the drive electric local or remote and to the lack of tension of feeding the operation can be manual to crank.
Built in accordance with IEC recommendations 62271-102 / IEC 62271-1.
Conductive parts in electrolytic copper; Contacts and blade silver; Quick-opening suitable for outdoor installation; Nema terminals 4 holes; Mono-polar; Horns broken arches of A ° stainless steel.